Various studies indicate that 66% of offices will provide workspaces that provide users with the flexibility to perform various types of tasks and choose where to do them.
This is why choosing an office chair is necessary to improve our productivity at work and at the same time, taking into account factors related to our health, and why not, our comfort.
The office chair is a basic key to optimize productivity at work
When you feel that our comfort is more important than choosing a good mattress.
The fact that we sit in an office chair (8–10 hours a day) is usually much longer than the time we spend sleeping (5-8 hours a day).
How much does a bed cost with a regular headboard with a regular mattress, plane sheet (two sets)…? It is true that the initial investment pays off in the long run, but we will see its results from the first minute.
For all these reasons, how to choose a desk chair is very important to spend time researching, testing, and comparing models. Thinking about the work environment is essential to the fact that aesthetics and value factors should prevail in this mental process.
With a good office chair, our productivity will increase at work if we know how to choose. To be successful, we must first understand the importance of a comfortable chair
Find out who we are most productive (some are ready to work, others are on the table, others are very straight …)
Worrying about our back and neck health. When we go to test it, pay attention to every detail of the chair. With these points in mind, we will come close to choosing the best office chair. Or at least one that fits our needs.
Features to consider before choose the office chair
What makes a good office chair?
No office chair is suitable for everyone. It is true that public opinion DXRacer Racing Series is the best in the market.
When testing a chair, these are points for assessment. Each person will give more or less importance to each of them, thus “giving your right chair”:
how to choose the right office chair is the question everyone asked. Look for the following features and functions.
Adjustment facility :
The arm and the crank are accessible and easily accommodated on a chair, arm, backrest or tilt.
When we get out of the desk, it’s normal to position the chair so that it enters the table well and everything is fine. Therefore, we will adjust the height every morning every day …
There are chairs that weigh so little that when you lift the lever you lift the chair up completely. You have to sit tight to notice your presence and then wake up …
It should be consistent that during the day you adjust your chair setting so that your business is better developed … It is not the same thing as reading a document, writing an email, or surfing the internet…
Tilting :
Whether one considers it necessary or not, it is necessary to assess the tendency to choose the best office chair.
For those who need it, it will be important to keep the arms in a balanced or horizontal position only with body weight.
The tilting of the chair is essential.
If your arms move with an inclination, it means that you have to remove the chair to bend because if you do this inside the table, the arms will collide and office furniture can get damaged (apart from being very annoying). .
It is also important to consider the possibility of establishing a tilt. Sometimes, a tilt is simply a swing while working, reading, or thinking … but if you want to be stable with a fixed tilt, not all chairs offer this possibility.
Headrest :
This ingredient is usually an additional supplement that most companies sell separately. It is therefore important to assess whether this is really necessary. Those looking for a reclining chair, so that the final position does not harm the neck and back.
This will not be too much for those looking for a more focused position to maintain a 90 ° angle with all the prominence of lumbar support. Women with long hair usually do not like this accessory because it is quite uncomfortable when their hair is tied.
Lumbar support :
A good portion of ergonomic office chairs includes a lower stiffener to help maintain a 90 ° position. Some of these reinforcements are adjustable so that the pressure you exert on this area of the body can be controlled.
Evaluation of the comfort of lower back support is very important. There are people who can harass them after a few hours. Then you usually resort to all kinds of pillows and reinforcements that “pollute” the chair very much.
Armrest :
Like the headrest, the armrest complements the chair that is sold separately on many models.
They should allow us to maintain a comfortable posture, with the arms forming a 90º angle while typing on the computer, while also supporting the elbows and forearms.
They are also useful to facilitate incorporation and must be strong enough to support our weight when we get out of the chair. On the other hand, it is advisable to choose models that allow us to vary the height and position of the armrests, as well as regulate their separation with the seat of the chair.
They should not under any circumstances oppress our hips or prevent us from standing near the table.
The armrest is an accessory that is sold independently.
At this stage, it is necessary to assess the comfort of the materials from which it was made, the ease of adjusting the height, and the choice of mobility.
For example, there are armrests that work not only vertically, but also later axes. We also have to take into account the mechanisms they use to build this organization. There are chairs you should call a NASA engineer to adjust the height of the arms, others have very comfortable buttons that inspire use instead.
Other details are the installation. Some stents are left with some stagnation and this is incorrect. Note unnecessary pressure on your hands and shoulders. You should be comfortable.
From time to time, be aware of your condition and release tension from your tendons. (You may now wonder why we’re crazy, but give it a try and you’ll see how we’re right.)
Seat depth and width :
When choosing an office chair, you should be aware of everyone’s body measurements. This way we will avoid it, big or small.
On the other hand, it is important to pay attention to the depth of the seat, so that after a few hours there is unnecessary discomfort in the thighs or knees. Some chairs allow the seat depth to be adjusted
Some chairs are slippery for some people, others are perfect. The size of our “butt” (3D) is crucial to making the right decision.
A very important point is that some chairs provide the ability to regulate seat depth. It is also very important because if this seat comes in contact with the knees (from behind) this will negatively affect blood circulation.
On the contrary, if the leg is released a lot, then we will apply intense pressure on the spine to maintain our posture.
Spinning wheel and Base :
We only have body-weight wheelchairs (fixed when I wake up); there are rubber wheelchairs designed for delicate floors. There are also concrete wheels for carpet floors…
Whether you are looking for a smooth glide or a fixed anchor you are looking for, it is important to evaluate the spin of the wheels to feel comfortable in the saddle.
The wheels on the base allow greater comfort to change positions or move around the workplace. The base must have five support points.
Some models allow placing different types of wheels with various levels of hardness, ideal to adapt the chair to different floors that we can find: carpet, parquet, stoneware, etc.
Footrest :
Although it is not an element that is normally part of the chair, the footrest is indicated to help us adopt the correct posture. The inclination has to be adjustable and it has to be made of non-slip materials that allow the correct support of both the feet and the fixation on the ground.
You must think about the ground when choosing wheels.
That is, at the time of purchase, you should consider the floor instead of the wheel. But chairs usually come with a type of wheel and you have to buy wheels that are different from chain wheels.
For our part, we recommend having a pair of wheels with brake legs that still dance and a chair while working. Without realizing this, you can try to support your heels to spend the rest of your day, which will not detract from your “posture”…
Office chair fabric
This is perhaps the most aesthetic point ever. There are clothes spoiled by rubbing fabric and others that are easy to clean. The goal is not to get rid of a particular color or texture of the fabric and think of more practical factors, for example, whether breathing is for warmth or not.
Black chairs become less soiled and can be sold even if there is a desire to renew later. 😉
Now your mind is clear that how to pick a good office chair for yourself.
Related Topics :
Best Office Chair Under 300-Chair Reviews and Buyer’s Guide
… [Trackback]
[…] There you will find 6626 more Information to that Topic: chairsviews.com/how-to-choose-an-ergonomic-office-chair/ […]