As we all know that office chairs come in different sizes, shapes, and designs. The adjustment of the office chair is essential for the comfortable sitting position.
Therefore the raise office chair is important for comfortable sitting. When you can’t do proper adjustments, it may cause discomfort.
Sometimes the office chair doesn’t have lever gear to raise or lower the office chair seat. It may be due to broken gear or an old office chair model without a lever or traditional handle.
If you can’t find the lever and want to adjust the office chair, then here we have mentioned a good solution for this problem. There are different ways to raise the office chair without a lever.
Table of Contents
How to raise Office Chair without lever
For those office chairs without a pneumatic lever, you can turn the office chair clockwise or anticlockwise to raise or lower the chair seat height.
Method #1 Clockwise and Anti-Clockwise Movement
Step 1
First of all, you need to determine the height you want to adjust the office chair. The height of the office chair must be equal to the distance between the floor and middle of the knee joint.
Therefore, in the standing position measure the distance of the floor and middle of the knee. Now measure the distance from the floor and seat chair. Noted down the difference.
Step 2
Many old office chairs have a small lock. Flip the chair over and unfasten it with a screwdriver.
Step 3
When the office lock loosened, then flit the office chair back to normal position and adjust the height. Now turn the chair clockwise and counterclockwise to and raise it.
One turn of seat clockwise that can adjust ¼ inch, therefore use that measurement you took to properly adjust the seat height of the chair.
Step 4
When you found the desired height, then reinsert the lock and tight it.
In case you have a pneumatic office chair but the lever is damaged. There are few techniques through which you can solve the problem of raising an office chair.
Method # 2 Bolt Movement
There is a bolt under the chair, with bolt movement, you can raise the chair height without a lever.
Follow these tips and adjust the height of the chair without a lever.
- Note down the right sitting position, now stand up and adjust the bold under the office chair. Turn the bolt up and down with chair height. Check the chair height with bolt movements.
- Now sit on the chair and check the seat height from the floor. If the chair height is perfect for you and comfortable. That’s good. If not found comfortable then again stand up and change the bolt movement until finding the better position.
- Repeat the process until you found the best sitting position.
Method #3 Makeshift adjustment lever
By using a makeshift adjustment lever to up and down the office chair seat easily, if the pneumatic lift working properly.
Just find the top of the cylinder on the pneumatic lift and flip the chair for a clear angle.
When you found the top of the cylinder, there is a small protruding pin. Just push the pin down and it will release the piston at the bottom of the pneumatic lift. By releasing the piston, now you can raise and lower the office chair.
Use the screwdriver, ruler, spatula, or any long object as a new makeshift lever.
Method #4 Lever Replacement
If you want a permanent solution, just replace the damaged or missing lever. You can find the replacement lever on the internet easily.
Once you receive the lever, then replace your damaged or old lever. When the repair of the lever is completed, then the office chair will raise and lower by just pressing the lever.
Method #5
Seat Cushion
You can also use a seat cushion to get some elevation. These seats are cushion are anti-skid pads which support your body. You can use these pads for indoor and outdoor activities.
Comfilife is a soft and comfortable seat cushion that is non-slipping. It will add extra height to your seat and reduce back and sciatica pain.
Desk Elevation Blocks
The desk elevation block raises the height of the desk so that it matches your office chair height. These anti-slip elevation blocks save your money and complete your height need. These blocks are strong and add extra height to the desk.
Conclusion
We hope you found the solution of how to raise office chair without lever with the above-mentioned tips.
It has been found the sitting for prolonging time in an uncomfortable position may affect your spine and cause back pain problems.
The perfect posture will make your sitting more comfortable for hours and decrease the change of lower back pain.
Recent Posts:
